VIP Coatings International

Cartridge Systems

VIP Cartridge systems for joint sealants, repairs and coating of small areas

VIP offers 2 cartridge gun systems for processing of 1500ml and 600 ml cartridges.

For the processing of the QuickSpray Xpress 1500 ml cartridges the pneumatic QuickSpray Xpress gun is the perfect choice. The 600 ml cartridges of the QuickFill series can be applied with either the pneumatic QuickFill cartridge gun or the manual 600 ml QuickFill cartridge gun.

Kartuschenystem Polyurea VIP

Cartridge Systems- Coating - Cold Spray 1500ml

The Polyurea cartridge material for Cold spray coatings (available in 1.500ml, 1:1 cartridges) is a specially formulated system for repair and maintenance operations on coated surfaces as well as for smaller applications ( < 20m²). It can be applied easily utilizing a standard 1.500ml pneumatic dispensing gun with a spray adapter in connection with a compressor that can guarantee 6-8 bar constant pressure with an air volume production of at least 240 l/min.

  • Extremely convenient and easy to use cold spray system
  • No special skills or expensive equipment required
  • Seamless spray application with instant curing properties – walk on in minutes
  • Moisture Insensitive technology for application in extreme climatic conditions
  • 100% solids, solvent free, VOCfree
  • Resistant to most chemicals, solvents, acids and caustics
  • Excellent corrosion protection, low permeability
  • Excellent impact and abrasion resistance
  • Excellent thermal stability. – remains flexible over a very wide range of temperatures
  • Good tensile and structural strength, high elongation properties
  • Very good adhesion to concrete, steel, aluminum, fiberglass, wood, foams etc.
  • Almost immediate return to service time

Cartridge Systems - Joint Sealants 600ml

QuickFill Joint Sealants are flexible 2-part, 100% solids fillers for a lot of different joint applications and repairs of surface defects derived from a reaction of an Isocyanate and a Polyurea resin blend. Self levelling materials have been especially designed for horizontal applications, non-sag version for vertical use. They penetrate into fractures of joints preventing water intrusion and sub-base damage. They are an excellent maintenance tool and they seal against most fluids and other contaminants. After cutting they will produce a smooth surface that will extend the life of concrete and reduce maintenance expenditures.

600ml pneumatic pistol

Directly to Project request

Joint Sealants

QuickFill NS Standard

  • 2K non sagging joint filler
  • Low viscosity
  • Specially designed for vertical applications
  • Seals against most fluids and other contaminants
QuickFill NS - Standard is 2-component, 100% solids joint filler that has been specifically designed for vertical applications requiring a non-sagging sealant.
Show product
Cartridge guns - 600ml

QuickFill Cartridge gun 600ml pneumatic

  • Pneumatic Cartridge Gun
  • For application off all QuickFill 600ml double cartridge sytstems
  • Easy handling
The QuickFill pneumatic cartridge gun is suitable for the application of all QuickFill 600ml double cartridge systems.
Show product
Joint Sealants

QuickFill SL Standard

  • 2K non sagging joint filler
  • Low viscosity
  • Specially designed for horizontal applications
  • For static joints and crack repairs in concrete substrates
QuickFill SL Standard is a low viscosity 2-component, 100% solids joint filler for static joints and crack repairs in concrete substrates. This Self Leveling Material has been especially designed for horizontal applications requiring a slower set time to
Show product
Cartridge guns -1500ml

QuickSpray X-Press Polyurea Cartridge Gun

  • Application of all VIP 1500ml double cartridge systems
  • Cold spray application
  • For application of QuickSpray XPress Standard cartridges
  • For application of QuickSpray XPress Soft cartridges
With the VIP QUICKSPRAY X-PRESS gun VIP high performance Polyurea coatings can be applicated without using expensive machinery.
Show product
2 component lining - 1500ml cartridge systems

QuickSpray Xpress Soft

  • Double cartridge system
  • For small and quick applications & repairs
  • Fast, mobile unit, immediate use, no electricity
  • 100% solids, no solvents, VOC-free
  • Hardness [Shore A] 70 ± 5
QuickSpray Xpress Soft is a very fast set, premium, 2-component 100% solids coating/elastomer derived from a reaction of an Isocyanate Pre-Polymer and an functional terminated resin blend. This elastomeric coating system has been especially designed to pr
Show product
2 component lining - 1500ml cartridge systems

QuickSpray Xpress Standard

  • Double cartridge system
  • For small and quick applications & repairs
  • Fast, mobile unit, immediate use, no electricity
  • 100% solids, no solvents, VOC-free
  • Hardness [Shore D] 45 ± 5
QuickSpray Xpress Standard is a very fast set, premium, 2-component 100% solids coating/elastomer derived from a reaction of an Isocyanate Pre-Polymer and an Amine terminated resin blend. This elastomeric coating system has been especially designed to pro
Show product
Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
More information Ok