VIP Coatings International

Joint Sealants

VIP QuickFill Joint Sealant Systems

VIP QuickFill joint fillers are flexible, polyurea based, 2-component grout and filler compounds as a result of a chemical reaction of isocyanates and amine resins. The joint fillers have a 100% solids content and have been developed both in low-viscosity and stable setting. The outstanding, permanently elastic adhesion properties allow fast, water- and pore-resistant repair and jointing, especially on concrete substrates. QuickFill joint filler systems are suitable for rehabilitation as well as maintenance of substrates . The surfaces are sealed and protected against ingress of various liquids and substances.

Notes for application:

Static joints like flat joints, construction joints or dummy joints can be made with a rigid sealing compound (friction-type connection) and then be covered with a coating.

Dynamic joints like joints between components or expansion joints must be closed in a way to allow for movement. This requires joint dimensions in accordance with the directives valid for concrete repairs. Coatings for dynamic joints must as a rule be kept mechanically separated from each other. This can be ensured by masking the area of the joint with adhesive tape to prevent any sticking above the joint. Caution: The expansion specified in the technical product information refers to the free film of the coating.

Directly to Project request

VIP QuickFill Joint Sealant Systems

Joint Sealants - Guns

Dispensing Gun - 600ml - 1:1 pneumatic

  • Pneumatic Cartridge Gun
  • For application off all QuickFill 600ml double cartridge sytstems
  • Easy handling
The QuickFill pneumatic cartridge gun is suitable for the application of all QuickFill 600ml double cartridge systems.
Show product
Moisture Barrier and Fillers

QuickBlock

  • Single component specially formulated lithium waterglass solution
  • Surface preparation of moist to wet concrete substrates
  • Can be used for the surface preperation for all VIP lining systems
QuickBlock LI is a single component specially formulated lithium waterglass solution for the surface preparation of moist to wet concrete substrates. QuickBlock LI blocks or closes concrete porosity through crystallization creating a deep moisture barrier
Show product
Concrete Repair and Preparation

QuickCrete Feather Coat

  • Filling of “Honey comb” sections in pre-cast concrete
  • Repair of de-moulding damage
  • Repair of exposed aggregate pockets
  • Quick and cost efficient
QuickCrete Feather Coat is a 1 component polymer modified mortar specifically designed for quick and easy repair of localized concrete substrate problems such as “honey combing”, “bug holes and form work irregularities
Show product
Joint Sealants - Cartridge 600 ml

QuickFill - NS - Standard 600ml

  • 2K non sagging joint filler
  • Low viscosity
  • Specially designed for vertical applications
  • Seals against most fluids and other contaminants
QuickFill NS - Standard is 2-component, 100% solids joint filler that has been specifically designed for vertical applications requiring a non-sagging sealant.
Show product
Joint Sealants - Cartridge 600 ml

QuickFill - SL - Standard 600ml

  • 2K non sagging joint filler
  • Low viscosity
  • Specially designed for horizontal applications
  • For static joints and crack repairs in concrete substrates
QuickFill SL Standard is a low viscosity 2-component, 100% solids joint filler for static joints and crack repairs in concrete substrates. This Self Leveling Material has been especially designed for horizontal applications requiring a slower set time to
Show product
Joint Sealants - Crack Repair

QuickFill Xpress

  • Rapid setting, high strength concrete repair polymer
  • Sets rapidly even in cold conditions
  • Back into service minutes after installation
  • Very low in viscosity
  • Designed for rapidly repairing and rebuilding of damaged concrete surfaces
Quick Fill X-press 6000 is a rapid setting, high strength, ultra-low viscosity concrete repair polymer. This two part polymer system is designed for rapidly repairing and rebuilding deeply spalled or damaged concrete surfaces, broken control joints and re
Show product
Primer solvent borne

QuickPrime 1K PU

  • Single component, solvent borne polyurethane based primer
  • Ideal intermediatry primer between coats of VIP`s elastomeric coatings
  • Excellent bonding strength on existing VIP coatings and metallic substrates
  • Ideal primer for steel applications involving impact and abrasion
Quick Prime 1K-PU universal is a single component, solvent borne polyurethane based primer. After application the solvent evaporates and the remaining chemical crosslinks by absorbing the moisture from the air and from the substrate in the case of a concr
Show product
Primer solvent free

QuickPrime 1K PU-SF

  • Solvent free, single component primer
  • Can be used for the production of a levelling mortar and scraping compound
  • Can be used a s a”holding” primer on metallic surfaces
Quick Prime 1K-PU universal SF is a single component, solvent free, polyurethane based primer. Being solvent free it is easy to handle and store and presents no health and safety issues on industrial and mining sites.
Show product
Epoxy primer

QuickPrime 2K Epoxy C

  • Low viscosity
  • Low odour
  • Good penetration
  • Good bond strength
  • Easy application
QuickPrime 2K Epoxy C is a 2-part, low odour, low viscosity, multipurpose, epoxy resin which can be used as an epoxy primer, levelling mortar and mortar screed.
Show product
Epoxy primer

QuickPrime 2K Epoxy CF

  • Low viscosity
  • Good penetration
  • Good bond strength
  • Easy application
  • Short waiting times
QuickPrime 2K Epoxy CF is a 2-part, low viscosity, multipurpose, epoxy resin which can be used as an epoxy primer, levelling mortar and mortar screed
Show product
Primer solvent free

QuickPrime 2K Epoxy SF21

  • Two-component modified epoxy resin
  • Solvent free (SF)
  • Primer for concrete and metal substrates
  • Base Coat for QuickFloor Systems
Quick Prime 2K Epoxy SF 21 is a two-component modified epoxy resin specifically designed for sealing and priming concrete substrates. It`s unique formulation allows for full curing on concrete substrates that have relatively high residual moisture content
Show product
Moisture Barrier and Fillers

QuickPrime Filler

  • Self levelling concrete repair compound
  • Self levelling floor topping
  • Self levelling patch repair product
  • Re-construction mortar
Quick Prime Filler is a special powder designed for use in VIP`s 2K Epoxy SF21 Primer in order to create a self levelling concrete repair compound or a self levelling floor topping.
Show product
Vip Kontakt Icon

Questions?

We are looking forward to your message.