VIP Coatings International

Coating

VIP lining systems for waterproofing and industrial applications

VIP Polyurea is a truly remarkable coating, lining and joint sealant technology and can be used for a wide variaty of applications. Polyurea coatings and linings are commonly applied over concrete and steel for corrosion protection and abrasion resistance. They also have numerous advantages over conventional materials due to their extremely fast setting times, high elongation, extreme resistance to atmospheric attack and their durability abrasion characteristics.

General notes for the application of VIP elastomeric membranes

Applying high-reactive elastomeric coating systems is only possible using a spray process. For high perfomance industrial requirements and larger areas the appliaction process needs a two-component high-pressure spray equipment with a working pressure of at least 130 bar which can be heated.

For repair, smaller areas and industrial applications also a low-pressure machine (VIP LP-02) can be used. VIP high-build linings should be applied in a layer thickness of at least 1.5 mm, and for higher mechanical or chemical loads, in a minimum layer thickness of approx 3 to 4 mm. For standard applications we recommend an average layer thickness of approx 2 mm. Material consumption (component A & B mixed) - approx. 1,2kg/ 1m²/ 1mm thickness.

Directly to Project request

VIP lining systems for waterproofing and industrial applications

Hand applied elastomeric lining

QuickRoll 2K

  • Two component easily cold-applied polyurea thick waterproofing coating.
Two component easily cold-applied polyurea thick waterproofing coating.
Show product
Hand applied elastomeric lining

QuickRoll 2K SF

  • Crack bridging ability
  • Elastic, seamless membrane
  • Thick layer (up to 2 kg/m2) applications possible in one coat
Two component easily cold-applied polyurea thick waterproofing coating.
Show product
High Build Elastomeric Linings HP - Quick Seal - Repair Foam

QuickSeal Expando FB1

  • Designed to close and secure suitably prepared concrete substrates
  • Suitable for horizontal and vertical applications.
  • Suitable for over coating with VIP membranes
  • Eliminates hand applied cementious skim coats and patch repair materials.
QuickSeal Expando FB 1 is a specially formulated expanding polymer designed to close and secure suitably prepared concrete substrates prior to the application of VIP elastomeric membranes. QuickSeal Expando FB 1 penetrates into bug holes and honey comb de
Show product
High Build Elastomeric Linings HP - Quick Seal

QuickSeal MP250

  • 2 component waterproofing membrane
  • Hot spray applied
  • Excellent cost to benefits ratio
  • Seamless Waterproofing. No welding of joints – totally seamless
QuickSeal MP 250 is an instant curing flexible Waterproofing membrane that can be built to any thickness in one application and an economical alternative to QuickSeal PP 350 for applications that are not subject to extreme climatic conditions
Show product
High Build Elastomeric Linings HP - Quick Seal

QuickSeal MP500

  • Flame Test according to ASTM E-108: Class A
  • Hot spray applied
  • Elongation at break [%] 450
  • Hardness [Shore A] 89 ± 5
  • Hardness [Shore D] 35 ± 5
QuickSeal MP 500 is an instant curing flexible Waterproofing membrane that can be built to any thickness in one application. QuickSeal MP 500 is an economical alternative to QuickSeal PP 350 for applications that are not subject to extreme climatic condit
Show product
High Build Elastomeric Linings HP - Quick Seal - UV Reflect

QuickSeal MP500 Reflect Silver

  • 2 component waterproofing membrane
  • High Solar Reflectance Index (SRI)
  • Superior thermal emittance
  • Hot spray applied
QSL MP 500 Reflect Silver is a highly-reflective elastomeric coating incorporating unique reflective chemistry. The lining provides all the benefits of VIP`s spray applied, instant curing, seamless membranes.
Show product
High Build Elastomeric Linings HP - Quick Seal

QuickSeal PP350

  • 2 component waterproofing membrane
  • Hot spray applied
  • Hardness [Shore D] 40 ± 5
  • Elongation at break [%] 300-350
  • Industrial lining
QuickSeal PP 350 is a spray applied, instant curing flexible membrane that can be built to any thickness in one application.
Show product
High Build Elastomeric Linings HP - Quick Spray Industrial

QuickSpray HC70

  • Fast spray applied installation.
  • Fast curing– touch dry in 40 seconds.
  • Completely seamless, even across multiple substrates.
  • 100% solids, VOC and solvent free.
QUICKSPRAY HC70 is specially designed for the coating respectively lining of XPS/ EPS based structures, figures frameworks and therefore it displays a membrane with excellent flexural stiffness and higher tensile strength.
Show product
High Build Elastomeric Linings HP - Quick Spray Industrial

QuickSpray HC80

  • High Shore hardness lining System. Provides structural strength and for the protection of rigid substrates like steel & GRP.
2k sprayable high shore hardness lining system for grp & steel
Show product
High Build Elastomeric Linings HP - Quick Spray Industrial

QuickSpray Industrial

  • Broadband industrial lining
  • Hot spray applied
  • Elongation at break [%] ≥ 340
  • Hardness [Shore D] 45 ± 5
QuickSpray Industrial is an instant curing, spray applied, seamless, and flexible protective membrane and sits in the middle of VIP`s high performance coatings range and is suitable for use in a wide range of generic applications requiring abrasion, impac
Show product
High Build Elastomeric Linings HP - Quick Spray Industrial

QuickSpray Industrial Slow

  • for smooth, mirror-like surfaces
  • Gel or pot life at 20 ° C [sec.] 60 - 90
  • Processing with low pressure machines
  • Processing with high pressure machines
Quick Spray Industrial Slow is a high-performance sprayable 2K elastomer coating system with a significantly longer gel or processing time, so that smoother, mirror-like surfaces are generated during spray application
Show product
High Build Elastomeric Linings HP - Quick Spray Industrial

QuickSpray Industrial W

  • for use in potable water applications
  • various potable water approvals
  • Cost efficient
  • 100% solids, VOC-free, no solvents
QuickSpray Industrial W is an instant curing, spray applied, seamless, and flexible protective membrane that exhibits excellent impact and tear strength. It will not crack, peel or splinter even under the harshest conditions and requires no maintenance to
Show product
Pigments Quick Seal and Quick Spray (B200l)

QuickSpray Pigment

  • Pigment paste for
  • specifically formulated for use in VIP`s QuickSpray and QuickSeal
  • for use in aromatic lining systems
  • for use in aliphatic lining systems
QuickSpray / QuickSeal Pigment is a pigment paste specifically formulated for use in VIP`s QuickSpray and QuickSeal elastomeric coating systems.
Show product
High Build Elastomeric Linings HP - Quick Spray Supreme

QuickSpray Supreme AL

  • Aliphatic polyurea
  • UV stable
  • Color stable
  • Wide application range
QuickSpray Supreme AL is an instant curing, spray applied, seamless, and flexible protective membrane. The membrane is suitable for use in a wide range of generic applications requiring abrasion, impact waterproofing and chemical resistance with the added
Show product
High Build Elastomeric Linings HP - Quick Spray Supreme

QuickSpray Supreme AL Soft

  • Extremely fast spray applied installation speed.
  • Completely seamless, even across multiple substrates.
  • 100% solids, VOC and solvent free.
  • Highly flexible, excellent elongation at break.
SUPREME AL Soft is a two component, spray applied, instant curing, high performance highly elastic elastomeric waterproof membrane that can be built to any thickness in one application.
Show product
High Build Elastomeric Linings HP - Quick Spray Supreme

QuickSpray Supreme HE

  • Extremely high elongation properties – 655%
  • Extended gel time
  • Quick and seamless lining even for complicates geometries
QuickSpray Supreme HE is a high performance, spray applied, instant curing flexible membrane that displays exceptional elongation properties.
Show product
High Build Elastomeric Linings HP - Quick Spray Supreme

QuickSpray Supreme HP

  • Significantly improved chemical resistance to acids and bleaches
  • Superior impact, abrasion and tear resistance properties
  • Very high values for tensile strength
  • Higher Hydrolysis resistance than general purpose elastomeric linings
QuickSpray Supreme HP is a specially formulated high performance protective lining specifically developed for extreme applications where abrasion, impact and chemical influences are high considerations.
Show product
High Build Elastomeric Linings HP - Quick Spray Supreme

QuickSpray Supreme W

  • Designed for use in potable water applications
  • Various potable water approvals from across the globe
  • Hot spray applied
  • 100% solids, VOC-free, no solvents
QuickSpray Supreme W is an instant curing, spray applied, seamless, and flexible protective membrane that exhibits excellent impact and tear strength. It will not crack, peel or splinter even under the harshest conditions and requires no maintenance
Show product
Cartridge Range Repair and Small Surfaces - Cartridges

QuickSpray Xpress Standard

  • Double cartridge system
  • For small and quick applications & repairs
  • Fast, mobile unit, immediate use, no electricity
  • 100% solids, no solvents, VOC-free
  • Hardness [Shore D] 45 ± 5
QuickSpray Xpress Standard is a very fast set, premium, 2-component 100% solids coating/elastomer derived from a reaction of an Isocyanate Pre-Polymer and an Amine terminated resin blend. This elastomeric coating system has been especially designed to pro
Show product
Vip Kontakt Icon

Questions?

We are looking forward to your message.