The existing STP had few GLS tans with epoxy coated cocnrete
floors. the client complained from many leaks. so the
coating on the floor was mostly removed by grinder, and the
lower part of the GLS tanks was mechanically grinded as
well.The whole area to be coated was primed by a two-component
solvent-free epoxy primer after wiping all the prepared
area with Solvent to clean all traces of dust any other contaminants.
QUICKSPRAY INDUSTRIAL was specified and applied at
a thickness of 2.5 mm on all the floor up to 300 mm of the
GLS walls. Al-Gadrawi did the job in two weeks in May 2020.